Ceramic coating is a popular type of protective layer for cars, boats, and other types of vehicles that can withstand harsh weather conditions, UV rays, and scratches. However, after investing into a ceramic coating for your car, it's essential to take proper care of it. So, what are the best ways to wash a ceramic coated car? And can you use a pressure washer on a car with a ceramic coating?
In this blog article, from the expert team at Detailing World, we will share more about some ways to maintain your new ceramic coating and find out whether using a pressure washer will damage your ceramic coating.
Ceramic coating is a clear liquid that forms a layer of protection over a surface. The coating is made of nanoparticles that create a chemical bond with the surface, creating a hydrophobic layer that repels water and dirt. Ceramic coating is known for its durability, long-lasting protection, and high gloss finish. It is commonly used on cars, boats, and other vehicles to protect the paint and keep it looking new.
In short, the answer to this question is yes. Ceramic coating can be cleaned using a pressure wash, but you must be careful not to damage it. Although ceramic coating is very strong and can withstand water under high pressure, it is not unbreakable. If used incorrectly, high-pressure water can harm the coating, causing it to wear off or peel.
Use the proper equipment and methods when pressure washing ceramic coating. It is crucial to pick a pressure washer with a setting of no more than 1500 psi. Over that limit could harm the coating. Additionally, to evenly distribute the water and lower the pressure, you should employ a fan nozzle or a broad spray pattern.
In order to get the best results and make sure you do not damage your ceramic coating, we recommend following these guidelines.
As previously mentioned, use a pressure washer with a pressure setting of 1500 psi or less for best results. Over that limit could harm the coating. Lower pressure settings for cleaning the surface without harming the coating are safer and more efficient.
Using a fan nozzle or a wide spray pattern can help distribute the water evenly and reduce the pressure on the coating. This is important because high-pressure water can damage the ceramic coating, causing it to wear off or peel.
Keeping the pressure washer at a safe distance from the surface can help prevent damage to the ceramic coating. It is recommended to keep the nozzle at least 12 inches away from the surface. This will help reduce the pressure on the ceramic coating and prevent it from wearing off or peeling.
Using hot water can damage the ceramic coating. High temperatures can cause the coating to degrade or wear off. Therefore, it is recommended to use cold water when pressure washing ceramic coating.
Harsh chemicals can damage the ceramic coating. It is recommended to use a pH-neutral car shampoo that has been specially formulated for use with ceramic coatings. This will help remove dirt and grime without damaging the ceramic coating.
After pressure washing the surface, it is important to rinse thoroughly to remove any soap residue or dirt. This will help prevent the ceramic coating from degrading or wearing off over time.
Detailing World stocks a wide range of car detailing and maintenance products to meet all your car care needs! We have a wide range of DIY ceramic coating and ceramic coating aftercare products available on our website, so you can get pro level results in the comfort of your home garage! Here is out top selection of ceramic coating products:
Americana Global Ceramic Aftercare Soap is the ultimate 2-in-1 automotive shampoo. Infused with advanced technology, theAmericana Global Ceramic Aftercare Soap is a multipurpose car soap, used by professional detailers and DIY enthusiasts worldwide. It has been formulated to work with professional-grade nano ceramic coatings offered by Ceramic Pro and other coating companies that offer DIY ceramic coatings.
This luxury car shampoo is a pH neutral formulation with aggressive surfactants that remove contaminants that bond to ceramic coatings – leaving a crisp and clean surface. This makes it perfect for removing caked on debris or sticky substances – and allows the ceramic coating to maintain and showcase its hydrophobic and protective qualities.
This high quality ceramic coating bundle from 3D gives you everything you need to apply a ceramic coating at home.
The 3D Ceramic Coating Kit Includes:
- 3D Ceramic Coating 30mL
- Applicator Block
- (2) Microsuede Towels
Directions for Use:
*Pro-tip: Make sure the surface is completely clean and decontaminated.
Wrap the 3D Suede Applicator around the 3D foam block and apply enough coating to cover the flat surface of the suede.
Using a cross hatch pattern (side-to-side and then up-and-down strokes), spreading the coat evenly. Work in sections.
Weather will determine the size of the section you want to work with. Temperature and humidity can affect how quickly the product dries.
Apply more product if the suede dries up. Wait 30 seconds and buff the product off with a clean soft microfiber towel. If the surface feels oily after buffing, wait a few more seconds and wipe off again.
Gyeon Q2M Ceramic Detailer, 400ml is the perfect maintenance product for ceramic coated cars that match the best of both worlds - spray sealing and regular quick detailing.Gyeon Q2M Ceramic Detailer, 400ml has the main function of increasing the brightness, gloss and adding hydrophobic properties.
Easy to Use -Gyeon Q2M Ceramic Detailer, 400ml does not differ from Gyeon Q2M Quick Detailer, 400ml when it comes to ease of use. It can be used on both dry and wet paint, where it has its potential as a drying aid. It can be used on any exterior surface, covered or not.
When pressure washing ceramic coating, it is important to use the right tools and techniques to avoid damaging it. Use a pressure washer with a lower pressure setting, a fan nozzle or a wide spray pattern, and keep the pressure washer at a safe distance from the surface.
Additionally, make sure to choose the best ceramic coating products from the Detailing World website to get best results!
For more information, please check out our website.
You can shop online at: https://detailtheworld.com/
You can visit us at 1223 Lancaster Rd #105, Manheim, PA 17545,
You can follow us on Facebook here: https://www.facebook.com/detailtheworld/
If you want to call us for more advice, please reach out to the team here at Detailing World at +1 833-609-6277